New Home - FIFFCO GLOBAL

What is Fire Protection Valve?

Fire firefighting valves are designed as an active fire protection & sprinkler systems. Valves also used for others water work & flow control systems. Read More

OS & Y Gate Valve

FIFFCO UL Listed OS & Y Gate Valve commonly used to control water flow to fire sprinkler systems. OS&Y means “outside stem and yoke” or “outside screw and yoke”. OS & Y gate valves operate by opening and closing via a gate, which lowers into or rises out of the valve. Raising the gate allows water to flow through the valve while lowering the gate cuts off the water flowing through the valve. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.

Check or Non Return Valve

FIFFCO UL Listed Check Valve, also known as a non-return valve, or one-way valve, is used to allow water to flow through it in only one direction. A hinged clapper remains open with water flowing in one direction and automatically closes when the flow stops preventing backflow. The removable cover allows easy access for inspection and maintenance. These valves are suitable for installation in both horizontal and vertical (with the flow upwards) pipelines.

Butterfly Valve

FIFFCO UL Listed Supervisory Switch Butterfly Valves are produced for separating the zones and acting like control valves. In fire protection systems, valves have to can be monitored. They are provided with a hand wheel mounted on the shaft that communicates with the gearbox for positioning. This way, users can have information about automation systems and improved equipment in order to see easily the valve body. It is suitable for use indoor or outdoors.

Y Type Strainer

FIFFCO UL Listed Strainers filter out the dirt, rust, and other debris in the water flow protecting the valves and other equipment in the piping system. All strainers are equipped with a flanged retainer cap which allows easy access to the stainless steel screen for cleaning. FIFFCO UL Listed Strainer should be installed horizontally with the cap facing downwards with access to remove the basket/screen.

Foot Valve

FIFFCO Foot Valve, also known as a check valve, is a low-pressure flat valve. Its role is to ensure that the liquid flows unidirectionally in the suction pipeline to make the pump work normally. When the pump is temporarily interrupted for a short time, the liquid cannot return to the water source tank to ensure water absorption The tube is filled with liquid to facilitate pump startup.

Expansion Joint

Check valves are generally installed in pipelines to prevent backflow. A check valve is basically a one-way valve, in which the flow can run freely one way, but if the flow turns the valve will close to protect the piping, other valves, pumps, etc. If the flow turns and no check valve is installed, a water hammer can occur. Water hammers often occur with extreme force and will easily damage a pipeline or components.

Check valves are used in many different applications. For example, they are often placed on the outlet side of a pump, to protect the pump from backflow. Centrifugal pumps, the most common type of water pumps, are not self-priming, and therefore check valves are essential for keeping water in the pipes.

Globe Valve

FIFFCO Globe Valve is a linear motion valve used to stop, start, and regulate fluid flow. The globe valve is used for throttling flow control. The globe valve is an excellent valve to use in the high-pressure operation of steam.

Auto air release valve

FIFFCO Air Release Valves are designed to vent entrained air that collects at high points in a pipeline. This valve continuously eliminates air from a system by releasing small quantities of air before large air pocket can occur in the system.

Alarm Check Valve

The alarm check valve is a water flow alarm device designed for vertical installation in the main supply to a wet pipe sprinkler system. When a flow of water from the system equals or exceeds that of a single sprinkler, the valve is to actuate a fire alarm External bypass prevents false alarm under all supply pressure condition.
Alarm Check Valve serves as a check valve by trapping pressurized water above the clapper and preventing reverse flow from sprinkler piping. The valve is designed to initiate an alarm during a sustained flow of water (such as the flow required by an open sprinkler) by operating an optional water motor alarm and/or alarm pressure switch.Alarm Valve is a double seated clapper check valve with grooved seat design, which ensures positive water flow for alarm operation and is designed for installation in wet pipe sprinkler system. External bypass prevents false alarm under all supply pressure condition. In the event of variable pressure condition, false alarms are prevented with the provision of retard chamber, thus the design allows for installation under both variable and constant supply pressure condition. Operation of one or more automatic fire sprinklers, the water flows into the sprinkler system and the alarm valve opens, allowing continuous flow of water into the system and transmittal of alarm, both electrical and mechanical.

Waste Cone

Waste cone provides quick-and-easy visual confirmation of proper water flow. Two sight glasses extending from the center allow users to observe the flow and ensure that fire pump pressure relief valve is working correctly.

DELUGE VALVE

Deluge systems deliver large quantities of water, over a large area, in a relatively short period of time. Deluge valve is one type of system control valve in a deluge system. Deluge Valve is a quick release, hydraulically operated diaphragm valve. It is used for fast application of water in a spray system. This type of valve preserves applications in the zones like industrial application, storage tanks, conveyor protection, power transformer installation, etc. Additional extension of foaming agent deluge valve can be deployed to inflammable liquid fire and aircraft hang

Double Door Wafer Check Valve

PRESSURE REDUCING VALVE

Adjust and control the outlet pressure of the master valve. The said pressure will not be changed along with the change with the inlet pressure, neither along with the change of the flow on the master valve outlet. Applicable for the living water supply, fire fighting system and industrial water supply system.

PRESSURE RELiEF VALVE

This valve is used for the high building fire fighting system. When the pressure in the water supply pipeline is over the one set for pressure relieving, the pressure relieving valve is opened to prevent both pipeline and equipment from getting damaged due to an excessive pressure; and, when the said pressure lowers to the set value, this valve will be closed automatically.

The body uses full-channel streamline design, leaving a small fluid resistance and a great flow. This valve can be used as a pressure relieving valve and also a pressure holding valve. When used as the former, it can relieve the pressure in the water pipe over the safety value set for the pilot valve and keep the pressure in the pipe below the safety value to prevent the system from getting danger due to an excessive water pressure; and, as the latter, it can keep the master valve upstream water supply pressure over a certain set value to make the water supply to the downstream only available when the upstream pressure is higher than the set value so as to ensure the master valve upstream water supply pressure.

Ball Valve

Fiffco Ball Valve is a kind of quarter-turn valve, and it uses a hollow and pivoting ball to control flow. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90 degrees by the valve handle. The brass ball valve is small and simple, which is used for controlling branches fire pipeline.

Anti Vortex Plate

Fire Hydrant Cabinets

FIFFCO Cabinets have an attractive and compact design with high universal quality standards. FIFFCO Cabinets can be surface mounted or recessed with architrave and 180° swinging action doors and center pivot door. FIFFCO cabinets come in mild steel finish, stainless steel finish Aluminum finish and wooden finish.
Read More

Lay flat fire hose

FIFFCO UL Listed Single and Double Jacket Synthetic Fire Hoses are lined with a high-tech EPDM tube whose engineered design guarantees minimum weight with maximum durability and flexibility. The polyester construction is mildew & rot-proof, tough, dependable, lightweight, and with outstanding abrasion resistance with our innovative Wisentec coating, the jacket is evenly and firmly woven and free from visible defects, thread knots, lumps and irregularities of twist. The most common use of these fire hoses are for exterior fire protection and are also used by Fire Brigades.

Angle Hose Valve

FIFFCO Hose Valve, angle pattern for the control of the flow of water from a pipe out to the valve and usually along a standpipe riser. Turning the handle of the hose valve allows the water to flow out from the valve, or shuts it off to prevent any more water from running out. It is used with a Fire Hose Rack Assembly, or as a Fire Department outlet connection. Female NPT inlet and Female NPT outlet or male hose thread outlet. 300 lbs rated. With red handwheel.

Fog/Spray Nozzle

FIFFCO Fire Hose Nozzles are UL listed and made as per international standards. Made of brass or metal alloy as per needs and requirements Fiffco Fire Hose Nozzles are completely adjustable to generate a fine spray, straight-stream or a wide spray of water. Suitable against Class A and Class B type of fire, the nozzles are an important component when it comes to fighting fire.

Fire Hydrant Cabinets

Breeching Inlet

An Inlet breeching valve is installed at ground level to provide a connection to the water supply. The system is usually dry and charged by the fire brigade in an emergency. FS120 has 2 inlets and FS121 has 4 inlets which are 2 ½” which are 2 ½” male instantaneous connections to BS336 and fitted with non-return valves, a 1” drain valve, caps and chains. 2 way and 4way inlet breeching valves can be installed in the vertical or horizontal position.

Wet Pillar Fire Hydrant

Wet Pillar Fire Hydrant is a water supply facility installed on the fire water supply network outside the building. It is mainly used for fire trucks to take water from the municipal water supply network or outdoor fire water supply network for fire hoses and fire nozzles. It is one of the important fire protection facilities.

Ball Valve

Oblique Landing Valve

FIFFCO Landing Valve is designed to be installed on wet risers in buildings for fire fighting purposes. It is an important source of water which is crucial for fighting fires on any level of your building. They are installed on hydrants, a branch and hose is connected to a coupling on it. By rotating the wet riser landing valve handle anti-clockwise, you can simply activate the water flux in the fire hydrant system.

Fire Hose Pin Rack

Fire Hose Pin Rack are used for fire fighting in water-supply service indoor areas. A set fire hose rack with one roll hose and valve, nozzle etc. Normally put in the fire hose pin rack cabinet or fix on the wall directly. When in use, open the valve and transfer water to the nozzle to extinguish the fire.The fire hose Pin rack spray red, with smooth appearance and high tensile strength. In the production process, we strictly follow the UL standards for processing and testing. Therefore, the size and technical requirements are consistent with the standard, and customers can buy with confidence.

Fire Hose Pin Rack

Rack Nipple supports fire hose rack assembly from angle valve to fire hose, and it adapts pipe thread to hose thread.

Jet Spray Nozzle

FIFFCO Hand-held Branch Pipe is made of a combination of Aluminium and plastics. The water flow control is by means of shut, jet, and spray. The branch pipe has a male instantaneous coupling inlet.

Fire Hose Reel

FIFFCO fire hose reels provide a very effective fire fighting facility with a continuous supply of water available immediately. The construction and performance of a fire hose reel with a semi-rigid hose ensure suitable installation in buildings and other construction works for use by the occupants. The fire hose reels are manufactured in both manual and automatic versions to comply to BS EN 671-1:2012 standards with semi-rigid hoses complying with BS EN 694:2014 standards.

Heavy Duty Exhaust Fan

High-Quality Raw Materials, With Good Impact Resistance, Anti-Aging, Corrosion Resistance. FIFFCO is a leading manufacturer of industrial big fans & gear-less HVLS fans in India. Innovation & Technology. Cost-Effective Solution.

Sight Flow Indicator

Sight glasses are used as components for visually checking the flow of the fluid inside piping from outside. Flowing state of fluid can be checked with the movement of the balls or wheel inside the sight glass

What is Fire Fighting Pumps?

A fire pump is a major component of a fire hydrant & fire sprinkler system’s water supply. Powered by electric motors or diesel engines, fire pumps deliver high-pressure water from reservoirs, tanks, or underground mains to sprinkler and hose systems in the event of a fire. These systems are essential for fire protection in buildings, industries, and critical infrastructures. Read More

FIFFCO End Suction Pump FSP Series

FIFFCO FSP Series End Suction Pumps are engineered for dependable fire protection and general water transfer applications where stable performance and durability matter. With a complete end suction pump range, FSP supports system designers and contractors across hydrant, sprinkler, and fire-water pump room installations. The series covers capacity up to 0–400 m³/h, head up to 00–114 m, and DN 40–125 mm, running at 2900/3000 rpm with maximum liquid temperature up to 120°C. Built with grey cast iron casing, AISI 304/Brass impeller, AISI 304 shaft, and mechanical seal, the FSP line is designed for long service life. Each unit is paired with a high-efficiency motor (IP55, Class F), anti-corrosive coated pump case, and NSK bearing with wear-resistant mechanical seal—making it a strong choice for reliable operation across varied duty conditions.

FIFFCO Electrical Motor Driven Pump

FIFFCO FSEM Series Electric Motor Driven Pumps deliver a robust, efficient pumping solution for fire protection and building services applications that require consistent pressure and flow. Designed around a wide performance envelope, the FSEM series offers capacity up to 0–1000 m³/h, head up to 0–164 m, and DN 32–150 mm, with temperature capability up to 120°C. The pump construction uses grey cast iron casing, AISI 304/Brass impeller, AISI 304 duty/shaft, mechanical seal, and grease-lubricated rolling bearings for reliability in continuous operations.

FIFFCO Diesel Engine Driven Pump FSDE Series

The FIFFCO FSDE Series Diesel Engine Driven Fire Pumps are designed for fire protection systems where independent power and high reliability are essential—especially in critical facilities and sites where electric power availability may be uncertain. The FSDE range supports capacity up to 0–1000 m³/h, head up to 0–164 m, and DN 32–150 mm, operating at 2900/3000 rpm with liquid temperature capability up to 120°C. Built with grey cast iron casing, AISI 304/Brass impeller, AISI 304 shaft, mechanical seal, and grease-lubricated rolling bearings, the series is engineered for dependable fire pump duty. The catalog notes that diesel engines have proven reliable and effective for driving fire pumps, and references NFPA 20 requirements including the use of diesel engines and the provision of two storage battery units. With advanced direct injection and combustion system support, FSDE is a strong solution for fire pump rooms, hydrant networks, and sprinkler systems where continuous readiness is non-negotiable

FIFFCO Jockey Pump FJS Series

FIFFCO FJS Series Jockey Pumps are engineered for maintaining system pressure in fire protection networks—ideal for compensating minor leakage and preventing unnecessary main fire pump starts. Built as a multistage, compact and proportional design, the FJS series emphasizes quiet operation and energy efficiency while delivering reliable pressure support for sprinkler and hydrant systems. The range covers capacity 0–110 m³/h, head up to 0–305 m, and DN 25–100 mm, running at 2900 rpm with Tmax 120°C. Power options span 0.37–45 kW, with 380/400/415 V, 50 Hz, Class F / IP55, and S1 continuous duty suitability. The design includes AISI304 impeller and shaft, mechanical seal, and grease-lubricated rolling bearings. Additional highlights include techno-polimer impeller, cast iron G20 threaded suction/discharge ports, NSK bearings, and wear-resistant mechanical seal—making FJS a dependable pressure maintenance pump for fire pump packages and building fire protection systems.

FIFFCO VERTICAL TURBINE FIRE FIGHTING PUMP SET

The Turbine fire pump set is composed of multiple centrifugal impellers, guide casings, water pipes, transmission shafts, pump base motors and other components. The pump base and motor are located above the pool, and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the water pipe, thereby generating flow and pressure.

What is Sprinkler System?

Fire sprinkler system is an active fire protection method, consisting of a water supply system, providing adequate pressure and flowrate to a water distribution piping system, onto which fire sprinklers are connected. Although historically only used in factories and large commercial buildings, systems for homes and small buildings are now available at a cost-effective price.
Read More

UPRIGHT SPRINKLER HEAD

Upright Sprinkler is a small, thermosensitive, glass-bulb spray sprinkler available in several different finishes and temperature ratings to meet design requirements. During fire, the heat-sensitive liquid in the glass bulb expands, causing the glass bulb to shatter. Water flowing through the sprinkler orifice strikes the sprinkler deflector, forming a uniform spray pattern in order to control or extinguish fire.

PENDENT SPRINKLER HEAD

Pendent Sprinkler is a small, thermosensitive, glass-bulb spray sprinkler available in several different finishes and temperature ratings to meet design requirements. During the fire, the heat-sensitive liquid in the glass bulb expands, causing the glass bulb to shatter. Water flowing through the sprinkler orifice strikes the sprinkler deflector, forming a uniform spray pattern to control or extinguish the fire.

Sidewall Sprinkler Head

Sidewall sprinkler head from another type. These small plates rest between the sprinkler’s orifice and the space it protects, shaping the water pattern as it sprays. While most (upright and pendent) sprinklers have a spoked circle, sidewall heads have a deflector that usually combines a semicircle and a flat plate that runs perpendicular to it. That shape guides water away from one direction and toward the intended direction.

CONVENTIONAL SPRINKLER

Conventional Pendent and Upright Sprinkler is a small, thermosensitive, glass-bulb spray sprinkler available in several different finishes and temperature ratings to meet design requirements. During fire, the heat-sensitive liquid in the glass bulb expands, causing the glass bulb to shatter.

CONCEALED SPRINKLER

Pendent Concealed Sprinklers are thermo-sensitive glass bulb sprinklers having decorative flat cover plate designed to conceal the sprinkler for smooth ceilings. The cover plates are available in several decorative finishes to match architectural requirements. The unique design allows installation and testing of the sprinkler before installation of the cover plate with the cup. The sprinkler housing is threaded to fix the cover plate with cup assembly to provide 12.7mm (1/2”) vertical adjustment.

ZONE CONTROL VALVES

A Zone Control Valve is a switch that is part of the water supply/fire protection system in a building, which includes landing valves, water storage tanks, and sprinkler systems. Its main purpose is to regulate water flow in the designated “zones” or areas and some buildings, by floors/levelsThe , thus named zone control valve.

Zone Control Valve is a system designed to separate the area in case of maintenance and to get the indication of the fire zone on a combination of Butterfly valve, Flow Switch, Pressure Gauge, and Test and drain Valves.

TEST AND DRAIN VALVE

The Inspector’s Test and Drain valve is designed to have two functions, both as an express drain and a test function for a wet sprinkler system. It is a combined two-position lever-operated ball valve, sight glass, and stop valve. Test and Drain are manufactured with sight glass assembly, providing a simplified means for testing water flow alarm devices and draining feed mains.

water flow detector

Water flow detector designed to detect fire sprinkler activations and send an alarm to a fire alarm panel and/or local fire authorities when water flows through fire system piping. A waterflow detector is designed for indoor and outdoor use in commercial, residential, and industrial water-based systems. It reduces the number of false alarms caused by pressure surges or trapped air. UL-listed, FM-approved, and nationally recognized safety standards. Available in a variety of diameters starting from 2″ up to 6″.

Wet Alarm Check Valve

FLEXIBLE SPRINKLER HOSE

The FIFFCO Flexible Sprinkler Hose is a unique sprinkler drop assembly comprised of a branch line adapter nipple, a stainless steel flexible hose with two slip nuts, a sprinkler reducer, and lightweight ceiling bracket components. (Ref. Figure 1.) The Flexible Hose can be installed in false ceilings without cutting and threading pipes associated with installing a drop, arm over, and elbows. FASTFLEX makes it possible to test and charge the system with water before the ceiling grid is installed. Once the ceiling grid is in position, the Flexible Hose can be reshaped to suit the final sprinkler location without draining the system.

ESCUTCHEON ROSETTE PLATE

The Recessed Escutcheon Plate is designed for recessed installation with certain pendent and horizontal sidewall sprinklers. It is intended for use in areas with finished ceilings or walls, and the adjustment provided by these escutcheons reduces the accuracy to which fixed piping to the sprinklers must be cut while providing a decorative recessed sprinkler.

PIPE FOR NETWORK

Firefighting pipes are one of the most crucial components of any establishment. It protects occupants, assets, and other valuables in case of fire. These pipes are usually painted red to make it easier for firefighters and other individuals to identify and separate them from other types of water systems.

Pipe Fittings & Accessories

Fire sprinkler pipes and related fittings are generally made of carbon steel or ductile iron material and used to carry water or other liquid to connect firefighting equipment. It is also called a fire protection pipe and fittings. According to the corresponding rules and standards, the fire pipeline needs to be red painted, (or with red anti-corrosion epoxy coating), the point is to separate from other pipeline systems. Since the fire sprinkler pipe is usually installed in a static position, it requires a high level and restricted quality control.

What is Fire Hydrant?

A fire hydrant is a connection point by which firefighters can tap into a water supply. It refers to measures taken to prevent fire from becoming destructive, reduce the impact of an uncontrolled fire, and save lives and property.
Read More

Conventional fire alarm system

A fire alarm system has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present.

FIFFCO GLOBAL has provided a complete range of UL Listed/LPCB approved Addressable and Conventional Fire Alarm & Notification Systems devices & accessories all over the world.

FFIFFCO Clean Agent System

A Clean Agent System Unit is a total flooding fire suppression system designed to rapidly extinguish fire using electrically non-conductive, residue-free agents that are safe for sensitive equipment and occupied spaces. These systems are widely used to protect mission-critical environments such as data centers, control rooms, electrical panels, telecom facilities, archives, and other areas where water-based or conventional suppression methods could cause significant damage or operational downtime. Clean agent systems ensure fast detection, effective suppression, and minimal post-fire cleanup while supporting business continuity.
Read More

FG 1230 Fire Suppression System

FIFFCO (FG-1230) chemically known as Dodecafluoro-2-methylpentan-3-one. Another widely recognized clean agent in the same category is FK-5-1-12. This agent is environmentally safe and is ideally suited for fire hazard areas involving Class A, B, and C fires. Owing to its excellent safety profile and highly effective fire suppression performance, it has been approved by the US Environmental Protection Agency (EPA) and ISO.

FG-200 (HFC-227ea) Clean Agent Extinguishing system units

The FIFFCO Fire Systems FG Series Clean Agent Fire Extinguishing System utilizes FG-200 (HFC-227ea) as the primary extinguishing medium. FG-200 (HFC-227ea) is a colorless, electrically non-conductive, and non-toxic clean agent, ideally suited for the protection of high-value and sensitive assets. It is specifically designed for use in normally occupied spaces, locations where post-fire clean-up is critical, areas with limited storage capacity for suppression agents, and environments requiring a non-conductive fire suppression solution.

What is Fire Extinguishing Systems?

A fire extinguisher is an active fire protection device used to extinguish or control small fires, often in emergency situations. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user, or otherwise requires the expertise of a fire brigade.

ABC DRY POWDER FIRE EXTINGUISHER

ABC Dry Chemical Powder, multi-purpose fire extinguishers are truly versatile for extinguishing Class “A” (carbonaceous material) fire achieved by sealing the burning embers. It is also used on Class “B” (flammable liquid), Class “C” (flammable gas), and electrical energizing fires. ABC dry powder extinguishers are filled with high-performance ABC powder and are ideal for residential, commercial, and industrial applications.

CARBON DIOXIDE FIRE EXTINGUISHER

Carbon Dioxide Fire Extinguishers leave no residue after discharge, therefore they are ideal for class B and electrical fire risks Involving electrical equipment in residential, commercial, and industrial environments like computer rooms, data storage centers, etc.

AFFF FOAM TYPE PORTABLE FIRE EXTINGUISHER

Foam fire extinguishers provide a cleaner and more effective alternative to dry powder extinguishers for class A and B fire risks. Foam fire extinguishers are ideal for multi-risk situations where both Class A combustable materials and Class B flammable liquid risks are likely to be found, or where Class B represents a direct hazard.

WATER FIRE EXTINGUISHER

Water fire extinguishers are a cost-effective option for class A fire risk only. The extinguishing medium is non-toxic and leaves no residue. These characteristics make them ideal for use in areas where there is a high risk of tampering or accidental discharge. Water has a great cooling effect on the fuel’s surface and thereby reduces the pyrolysis rate of the fuel.

ABC DRY POWDER FIRE EXTINGUISHER

CARBON DIOXIDE FIRE EXTINGUISHER

AFFF FOAM MOBILE TYPE FIRE EXTINGUISHER

AUTOMATIC DRY POWDER FIRE EXTINGUISHER

What is Foam Suppression Systems?

Foam fire suppression systems are an option for fire protection in some areas where water is not an option as clean agent. The foam used for fire suppression has three components. Foam concentrate, water, and air combine together to create foam. When the suppression system is triggered, it releases a blanket of foam. Fires are extinguished by a combination of cooling and smothering of the flames. The foam also traps flammable vapors that could possibly ignite.

Foam RATIO CONTROLLER

Ratio Controller is used to produce constant preset foam solution in pressure proportioning systems. It is designed to inject automatically the correct quantity of foam concentrate into a water stream over a wide flow rates by balancing the pressure of the foam concentrate with that of the water supply.

FOAM BLADDER TANK

Bladder Tank is designed to inject foam concentrate into the water supply of a fire protection system. During operation the foam concentrate is discharged from the tank by the water supply, collapsing the bladder around a perforated center tube until the concentrate is depleted.

FIRE MONITORS

Fire monitors are designed to accommodate foam which has been injected in the upstream piping. It is durable manual controlled low profile monitor for fixed installation as well as trailer mounted unit.

FOAM GENERATOR

Will be adding soon

INLINE FOAM INDUCTOR

Inline Foam Inductor is to induct the foam liquid concentrate in water stream to supply proportioned solution of the liquid concentrate and water, to the foam producing equipment. Each Inductor is designed for a pre-determined water to give the correct proportioning at that pressure and discharge rate. The increase or decrease of the inlet pressure will result in an increase or decrease in the flow rate, which in turn will change the proportioning.

AIR FOAM WATER SPRINKLER

A foam water sprinkler is an air-aspirating discharge outlet used in the deluge foam system to protect the risk where foam is required to be applied from overhead sprinklers. It protects the loading and unloading area in the event of a spill fire with low-expansion foam systems. These are useful in other wide applications i.e. air craft hangers, warehousing.

AIR FOAM NOZZLE

will be adding soon

AIR FOAM CHAMBER

FOAM CHAMBER a discharge device is designed to apply an expanded foam blanket over the surface of a flammable liquid fire as gently as possible to achieve extinguishment and/or vapor suppression. Foam chambers are suitable for the protection of fixed roof-mounted tanks and are to be used as low-expansion Type II discharge devices (as defined by NFPA11).

FOAM EDUCTOR

In line Foam, Eductors have a metering head with an easy-read knob for 1%, 2%, 3%, 4%, 5%, and 6%. Your choice of extra large 36” pickup hose with stainless steel wand or direct truck connect pickup hose is ideal for use with high viscosity foams. The meter head is equipped with a unique back flush push-button for fast cleaning and is secured to the eductor body with a rugged disconnect.

Foam RATIO CONTROLLER

FOAM BRANCH PIPE

Hand line foam branch pipe is a hand-held nozzle used in all types of low-expansion foam systems. It is generally used where the foam is required to be applied manually. The branch pipe is used to protect loading racks, tank farms, chemical plants, spill fires, etc.

HYD. CONCENTRATE VALVE

Foam concentrate control valve is automatically opened at a minimum of 3 Kg. ( 42.8psi ) water pressure and there is a water flow in the inlet pipe of the ratio controller of the bladder tank or in the inline balance pressure proportioning system and allows foam concentrate to flow to the proportioning device. No electric power is required to operate the valve.

What is HVAC System Equipment?

HVAC (Heating, Ventilation, and Air Conditioning) system equipment encompasses various components designed to regulate indoor climate and ensure comfort and air quality in residential, commercial, and industrial settings. Key elements include furnaces or boilers for heating, air conditioners and chillers for cooling, ventilation systems to manage airflow and filter air, and thermostats for precise temperature control.

Pre Insulated Chilled Water Pipe

FIFFCO Pre-Insulated Pipes are high-performance thermal insulation piping solutions engineered for district heating, cooling, and industrial pipeline networks. Designed for durability, energy efficiency, and long service life, these prefabricated pipes integrate a working steel pipe, high-density polyurethane (PUR) insulation layer, and a robust external protection casing such as polyethylene (PE) or other protective materials.

HVAC Pump for Chilled Water

HVAC Pumps are essential components in heating, ventilation, and air conditioning systems, ensuring the efficient circulation of chilled water, hot water, and condenser water throughout commercial and industrial facilities. Designed for reliable performance and energy efficiency, HVAC pumps maintain optimal temperature control, system balance, and operational stability.

Pressure Independent Balancing Control Valve (PIBCV)

FIFFCO’s Pressure Independent Control Valve (PICV) offers precise flow control for optimizing environmental comfort in variable capacity heating and chilled water systems.

Copper Valves

FIFFCO HVAC Copper Valves are designed to provide superior performance and durability in heating, ventilation, and air conditioning systems. Constructed from premium-grade copper, these valves offer excellent thermal conductivity and corrosion resistance, ensuring reliable operation in diverse environmental conditions. FIFFCO HVAC Copper Valves are engineered to deliver precise control and efficient flow management, enhancing the overall efficiency and longevity of HVAC systems.

Iron Valves

FIFFCO HVAC Cast Iron Valves are engineered for exceptional durability and performance in heating, ventilation, and air conditioning systems. Crafted from high-quality cast iron, these valves offer robust resistance to wear and tear, ensuring long-lasting reliability in demanding environments. Designed to handle a wide range of temperatures and pressures, FIFFCO HVAC Cast Iron Valves provide precise control and efficient flow regulation, enhancing the overall efficiency and safety of HVAC systems.

Piping Specialties

FIFFCO HVAC Piping Specialties are designed to enhance the performance and reliability of heating, ventilation, and air conditioning systems. With a focus on quality and innovation, FIFFCO offers a comprehensive range of piping solutions, including fittings, connectors, and supports, all engineered to withstand the rigors of industrial applications.

Balancing Valve

The static balance valve has a dual cone construction that limits the maximum stroke of the cone and thus limits the flow rate at the same time, it also has the shut-off function. The static balance valve is equipped with a flow measurement connector and a differential pressure valve pulse tube interface.

Electric Actuators

FIFFCO Electric Actuators are designed to control HVAC dampers and valves efficiently. These actuators use small motors to turn dampers or valves open and closed, regulating airflow or water flow rate. They are essential for maintaining optimal climate control and ensuring energy efficiency in HVAC systems. Available in various types, including spring return on/off actuators and modulating actuators, FIFFCO Electric Actuators provide reliable performance and easy integration into HVAC systems.

What Is Fire Fighting Door?

The FIFFCO Fire Door is an essential safety feature for any building, designed to prevent the spread of fire and smoke between sections, ensuring the safety of occupants and the protection of property. Constructed with top-grade fire-resistant materials, FIFFCO Fire Doors can withstand extreme heat and flames for specified periods, typically ranging from 30 to 120 minutes. These doors are equipped with intumescent seals that expand when exposed to heat, effectively sealing gaps to prevent the passage of fire and smoke. Additionally, FIFFCO Fire Doors include hardware such as self-closing mechanisms and fire-rated hinges, ensuring reliable performance during emergencies. Integral to any comprehensive fire safety plan, FIFFCO Fire Doors provide peace of mind and critical protection in the event of a fire.

Fire Door

What Is an Industrial Pump?

FIFFCO Industrial Pumps are essential mechanical devices engineered to move liquids, slurries, or gases through piping systems in various industrial processes. Designed to handle large volumes and high pressures, these pumps ensure efficient and reliable fluid transfer across sectors such as manufacturing, mining, chemical processing, water treatment, and oil and gas. FIFFCO offers a range of pumps, including centrifugal pumps, positive displacement pumps, and diaphragm pumps, each specifically tailored for diverse applications and operating conditions. With robust construction and precision engineering, FIFFCO Industrial Pumps maintain operational efficiency and safety even in the most demanding industrial environments.
Read More

Industrial Pump

What Is Industrial Valves?

An industrial valve is a mechanical device designed to control the flow and pressure of fluids (liquids or gases) within a system or process. It is crucial in various industrial applications, including manufacturing, oil and gas, water treatment, and chemical processing. Industrial valves come in different types, such as gate valves, globe valves, ball valves, and butterfly valves, each suited for specific functions and operating conditions. These valves ensure safety, efficiency, and reliability in industrial operations by regulating fluid dynamics accurately.

About FIFFCO

OUR CORE MORALS

FIFFCO GLOBAL LIMITED chases their core morals as a guide to build up the mutual principle of operation to honorable clients.

QUALITY

INTEGRITY

TEAMWORK

IMPORTANCE

PASSION

INNOVATION

DIVERSITY

DISTINCTION

Our Products

FIFFCO HVAC Copper Valves

FIFFCO HVAC Cast Iron Valves

HVAC Piping Specialties

Balancing Valve

HVAC Electric Actuators

Pressure Independent Control Valves

Pressure Independent Control Valves

Pressure Independent Control Valves

Fire Fighting Door

Fire Protection Valve

Fire Hydrants

Fire Fighting Pump

Fire Sprinkler

Fire Alarm System

Gas Suppression System

Fire Extinguishers

Foam System

Industrial Valves

Industrial Pumps

Company

Products & Solutions

Social Media

Web Mail Login

What is Fire Protection Valve?

OS & Y Gate Valve

Check or Non Return Valve

Butterfly Valve

Y Type Strainer

Foot Valve

Expansion Joint

Globe Valve

Auto air release valve

Alarm Check Valve

Waste Cone

DELUGE VALVE

Double Door Wafer Check Valve

PRESSURE REDUCING VALVE

PRESSURE RELiEF VALVE

Ball Valve

Anti Vortex Plate

Fire Hydrant Cabinets

Lay flat fire hose

Angle Hose Valve

Fog/Spray Nozzle

Fire Hydrant Cabinets

Breeching Inlet

Wet Pillar Fire Hydrant

Ball Valve

Oblique Landing Valve

Fire Hose Pin Rack

Fire Hose Pin Rack

Jet Spray Nozzle

Fire Hose Reel

Heavy Duty Exhaust Fan

Sight Flow Indicator

What is Fire Fighting Pumps?

FIFFCO End Suction Pump FSP Series

FIFFCO Electrical Motor Driven Pump

FIFFCO Diesel Engine Driven Pump FSDE Series

FIFFCO Jockey Pump FJS Series

FIFFCO VERTICAL TURBINE FIRE FIGHTING PUMP SET

What is Sprinkler System?

UPRIGHT SPRINKLER HEAD

PENDENT SPRINKLER HEAD

Sidewall Sprinkler Head

CONVENTIONAL SPRINKLER

CONCEALED SPRINKLER

ZONE CONTROL VALVES